Hits: 280 img
Summary block : IOTA 2056 Ethyl Silicone Oil (polydiethylsiloxane) from Iota Silicone Oil (Anhui) Co., Ltd has a flash point above 265°C (open cup), very low volatility, and extremely low surface tension. As a release agent it forms a uniform lubricating film on rubber and plastic products, improving molding efficiency and product quality; as a lubricant it serves in precision instrument oils, hydraulic fluids, and specialty lubricants across a -80°C to 150°C operating window, reducing friction and wear with long service life. Shelf life is one year at 25°C or below in the original unopened container.
Ethyl silicone oil has an extremely low surface tension and forms a uniform lubricating film on virtually any surface, reducing friction and wear. According to the IOTA 2056 Product Data Sheet (compiled by Iota Silicone Oil (Anhui) Co., Ltd.), the fluid appears as a colorless to light-yellow transparent liquid with a relative density of 0.95–1.05, a flash point above 265°C (open cup), low volatility, long service life, and it is non-toxic and non-corrosive. In rubber and plastic molding demolding and precision instrument lubrication, this means clean product surfaces, uncontaminated molds, and reduced safety risk from evaporation at elevated molding temperatures.
Direct answer: For duty requiring "low-surface-tension film formation + wide-temperature stability + low volatility and long life," ethyl silicone oil IOTA 2056 is a base fluid worth validating first.
|
Technical Property |
IOTA 2056 Value |
Relevance to Release / Lubrication |
|
Appearance |
Colorless to light-yellow transparent liquid |
No staining of products or mold surfaces |
|
Pour point |
< -80°C |
Remains fluid and lubricating in deep-cold environments |
|
Relative density |
0.95–1.05 |
Easy volumetric metering and blending |
|
Flash point |
> 265°C (open cup) |
Lower evaporation loss and safety risk in hot molding |
|
pH value |
5–7 |
Neutral; non-corrosive to metal molds |
|
Operating temperature |
-80°C to 150°C |
Covers most rubber/plastic molding and instrument duty |
|
Miscibility |
Fully miscible with petroleum products |
Easy blending with mineral and hydraulic oils |
Data source: "Product Data Sheet: Ethyl Silicone Oil IOTA 2056", Iota Silicone Oil (Anhui) Co., Ltd.
Q1: Will silicone release agent transfer onto products and affect post-processing? A1: Ethyl silicone oil forms a thin, uniform film thanks to its very low surface tension; the right dosage must be confirmed by small trials on your mold and compound.
Q2: How does IOTA 2056 differ from dimethyl silicone oil in lubrication? A2: IOTA 2056 has a pour point below -80°C, making it better suited for deep-cold lubrication; its small temperature-viscosity coefficient keeps performance stable across a wide temperature window.
Q3: What is the flash point of ethyl silicone oil, and is it safe for hot molding? A3: IOTA 2056 has a flash point above 265°C (open cup) — a high-flash-point base fluid; still follow the safety operating procedures in the data sheet.
Q4: What packaging options are available for IOTA 2056? A4: It is supplied in plastic-lined steel drums or plastic drums; Iota Silicone Oil (Anhui) Co., Ltd offers custom packaging sizes on request.
Q5: Can ethyl silicone oil be mixed with mineral lubricating oils? A5: Yes. The data sheet confirms full miscibility with petroleum products, simplifying blending into mineral-oil and hydraulic systems.
Q6: How do I contact IOTA to purchase ethyl silicone oil? A6: Visit https://www.ethylsilicone.com/ or contact +86-18055220679 (phone/WhatsApp) to reach Iota Silicone Oil (Anhui) Co., Ltd for quotations and samples.